Submerged spiral classifier . Principle overview. The finely ground pulp is fed into the water tank from the feed inlet in the middle of the settlement area. The slurry gradation settlement area is under the inclined installation of the water tank.
Submerged spiral classifier The spiral classifier is widely used to pregrading and inspection grading in closed circuits when used in the production flow of metal processing. According to the difference in sedimentation rate of mineral particles and mud, the particle sizes of ores with 1.5mm 0.03mm are classified.
08/12/2016· Submerged Immersed Duplex Twin Spiral Classifiers YouTube. The high type is usually used in grinding circuits for classification sizes of 100 mesh or coarser. The submerged spiral type ...
Submerged Spiral Classifier. Click Image to Zoom. Spiral classifier working principle: Fine ore pulps are fed into water tank through feeding opening located in the center of settling zone. Beneath the inclined water tank is the ore pulp classification zone where ore pulps are stirred by low speeded impellers.
The Spiral Classifier is available with spiral diameters up to 120. These classifiers are built in three models with 100%, 125% and 150% spiral submergence with straight side tanks or modified flared or full flared tanks. All sizes and models are available with single , double or triple pitch spirals.
Submerged Spiral Classifier. Submerged Spiral Classifier the spiral of overflow end is completely immersed below liquid level. Submerged spiral classifier with the spiral of overflow end completely immersed below liquid
12 · Submerged spiral classifier with the spiral of overflow end completely immersed below liquid level is applied in classifying ore with particle size 0.150.07mm. Product Structure Technical Parameters. Please contact us if you want to choose the most suitable high spiral classifier, and our experts will give you advice
Submerged spiral classifier The submerged spiral classifier is the one whose spiral blades at the overflow end are completely immersed below the overflow surface. It has a small settlement area and low overflow production capacity,
Submerged Spiral Classifier Introduction Classifier equipment with overflow end helix immersed under liquid level. Capability 50 1410 t/d Application Spiral blades at the overflow end are all immersed below the overflow surface, which is mainly suitable for ore classification with overflow size of 0.15 0.07 mm.
June 10, 2020
Copyright © 2020.Company name All rights reserved.