A liquid liquid separating hydrocyclone that utilizes gradual taper angles to reduce energy loss, helical precession, and velocity differentials and, thereby, increase the efficiency and capacity of the hydrocyclone. A separation portion of the hydrocyclone tapers to the underflow outlet orifice and no cylindrical portion is used at the underflow end.
06/08/2015· The entrance to the cyclone was designed this way to allow the incoming feed to help generate and not interfere with the spiral path that the ore must take inside the cyclone. The centrifugal force that is generated by this spin, forces the bigger particles outwards towards the wall of the cyclone. If you were able to do a
01/11/2003· This research addresses the issue of predicting the separation efficiency of a volute entry 10 mm hydrocyclone. The feed flow rate is 4.5 litres/m yielding a Reynolds number of 9500 and a swirl number of 8.4.
1. Patent volute feeding chamber design with large capacity and high classifying efficient . 2.Unique multi cone structure with high underflow concentration and large underflow yield . 3. HW KM hard wearing composite material lining , excellent alkaline corrosion resistance ,long service life ,less maintenance cost.
Hydrocyclone is widely used in closed circuit grinding operations but it also has many other applications, such as desliming, degritting, and thickening. ... feed structure could be divided into the involute feeding, the volute pre classifying feeding, spiral feeding etc. According to conical structure, it could be divided ...
Hydrocyclones use the centrifugal separation principle to remove or classify suspended solids in a slurry. The VorSpin Hydrocyclone features three improvements in hydrocyclone efficiency: 1) A Volute feed inlet, 2) A fluted Vortex Finder and 3) a Non plugging discharge Apex nozzle. The Volute feed inlet prevents the slurry from circulating back ...
Hydrocyclone feeding is an important factor which could influence hydrocyclone operational capacity. Compared with other equipment, hydrocyclone has stricter requirement of feeding. Hydrocyclone feeding is required steady and balance. Meanwhile, it is required to reduce instability of slurry flow and particles concentration difference in slurry.
The VorSpin Hydrocyclone features three improvements in hydrocyclone efficiency: A volute feed inlet; A fluted Vortex Finder; A non plugging discharge Apex; The Volute feed inlet prevents the slurry from circulating back into the path of the incoming slurry, causing undesirable turbulence that reduces separation efficiency.
Thus, the device implements a mechanism for separating light and heavier fractions . Liquid liquid hydrocyclone has been used in the produced water ...
June 10, 2020
Copyright © 2020.Company name All rights reserved.